Product Description

Product Description:

This computer uses a wireless digitally coded transmission , reduces environmental impacts(electromagnetic waves,another device nearby etc.) and ensures smooth operation and high accuracy of record data. Computer handling is very simple and intuitive thanks to two easily accessible and well working buttons.No tool needed for installation. Installation Steps

1. The bicycle computer base is fixed on the handlebar

2. The magnet mounted on the spokes

3. Used tie the sensor is fixed to the bicycle fork

4. Adjust the position of the head or the sensor, so that the distance is about 3mm, and then were fixed

5. Place the bicycle computer on the bracket

Functions:

1.CLOCK(12/24 FORMAT)

2.STOPWATCH

3.TEMPERATURE

4.EL BACKLIGHT

5.METRIC / IMPERIAL ALTERNATIVE

6.SCAN

7.RIDING SPEED

8.AVG SPEED

9.MAX SPEED

10RIDING TIME

11.TRIP DISTANCE

12.TOTAL ODO

13. AUTO ON/OFF

14. SPEED COMPARISON PROMPTS

Package Content:

1.Head Device

2.Bracket

3.Senor

4.Magnet

5.Wireless transmitter

6.Rubber Slice

7.Plastic Strap

8.Bracket Seat

9.Introduction Manual

Product Features

• 【Notes Need Highly Attention】 1. Remove the insulation sheet in the sensor and computer 2. Check distance between magnet and sensor, it should be controlled ≤ 3 mm 3. Let the sensor’s front side(with words”SENSOR”) towards magnet 4. Plase check the video for the unit change from km/h to mp/h: https://www.youtube.com/watch?v=SHMDDrWdv-A&feature=youtu.be 5. The device rattling in engaging that it is normal phenomenon because of the design of wireless automatic function
• 【Big Font Data & Minimalist Design】 What catches your eye is that a body smaller than a bank card has a clear, readable and highly visible data display because only two lines of display and only two buttons (which can be selected by pressing the left key for a long time). Not only ensures that you can easily read the data on the screen while riding, but also enhances the safety of riding
• 【Automatic System & Group Speed】 Automatically read cyclic data, with 7-day memory and automatic power on/off function, no need to fiddle with buttons or waste battery power. The device can track your speed through the top display of the current speed, as well as the bottom display of the maximum and average speeds. It also has a relative speed indicator which visually checks whether it is running faster than average
• 【Day-Night Backlight & Multi-Function】 Built-in white backlight, providing night viewing. Keeping the display readable in low light makes it easy to read all the data clearly that to be your good companion when riding at night. The back light will turn on when press two buttons in the same time. Other Functions: Measured mileage, accumulated distance, travel time, total time, clock, stopwatch, temperature, etc
• 【Easy to Operation & Widely Application】 Without pairing, the big font data speedometer can be easily mounted on the bicycle’s front wheel, with a distance of less than 60cm from the speed sensor and a gap of 1.5mm from the magnet, enabling accurate speed tracking and automatic recording. Suitable for most types of bicycles: Road bicycles, mountain bikes, folding bikes and other common bicycles